18. When filling a liquid product, what happens if the pump motor of the filling machine cannot pump the material? How can we deal with it?
If the pump motor of the filling machine does not work while filling the liquid, it is mainly caused by the following reasons:
1. First, checking the wire circuit of the filling machine from the motor to the inverter and confirming whether the inverter is operating normally.
2. Check if the plug of the filling machine is loose, which may cause the pump motor to be unfunctional.
3. Whether the cleaning is not immediately cleaned after production, causing the last filling of the material stick to the filling tube during the next production.
4. While changing the different filling materials, it is necessary to confirm whether the specification of the liquid material conforms to the filling liquid suitable for the type of filling machine originally purchased. If the filling machine is originally used for the thinner liquid, and you change it to fill the sticky liquid product. There will be a jam or a situation in which it is impossible to draw.
After the above inspection steps are confirmed, if the problem has not been improved, it is recommended to record the status of the production at the time, or provide a film of the production operation of the equipment, we will be able to judge the problem point and provide the corresponding solution.