41. Our olive oil is currently outsourced to bottling and filling bottles. Due to the increasing number of capacities, it is expected to purchase a filling and capping machine to pack the products by ourselves. Which machine is suitable for olive oil glass bottles and aluminum caps? If there are multiple aluminum caps with different specifications, can only an aluminum capper be used?

First, we’ll need to know your daily production capacity for your olive oil product and recommend you the suitable filling and capping machine based on the production capacity requirement accordingly. If there is no high production capacity required and speed is not concerned, we’ll recommend the easy-operating and affordable tabletop aluminum cap capping machine to you. This ROPP capper using is to put the aluminum cap on the bottle then hold the bottle manually for botte capping. The production speed depends on the dexterity and the speed of the operator. If the production capacity is larger and would like to decrease manpower demanding, we would suggest the automated ROPP capper to you. This type of automatic capper which is equipped with conveyor to deliver the product and can be connected to oil filler and cap feeder in the front end. The operator only needs to put the bottles on the in-feeding turntable and the caps into the cap feeding bowl to run the whole filling and capping production. The capper also can be connected to the collecting turntable in the rear end. Then only one operator is needed to reload the bottles and caps and to collect the bottles in the rear end as well. Originally, there is only one size of cap to be applied on the ROPP capper which means each capping chuck for one size of cap. If there are three kinds of caps in different sizes, then two additional customized capping chucks are needed.